TLA 21X Shall be the Line Array Loudspeaker Passive 2 way unit (10" B&C Custom Made + 2 x 1" BMS). Item is a compact high power, low weight unit. Annular Driver followed by a perfect matching Wave Guide and Differential Horn. Low Frequency driver is High End High Power Neodymium, special designed 10" unit. System assembly is simple and the fastest available.
TLA 21AP Shall be the Amplifier / Processor section for 4 units of TLA21X – It consists of 4 Power Amplifier: Each 2 as Bi Amp for each pair of TLA21X. All driven by High End dedicated Processor. The level of each pair can be adjusted, enabling Down Fill effective use or perfect Column control for distant applications.
TLA 21E Shall be an empty cabinet (closed front) of TLA21X for the use of height adjusting in the case of Floor Standing system (gap in between Sub and Tops).
TLA WS218XA Shall be the Dual 18" High Power Floor Subwoofer consists of 2 x 1200WAES premium B&C loudspeaker units and matching Processor / Amplifier units (4500W Power) with selected Cross Over frequencies. The Subwoofer cabinet designed to contain one TLA 21AP for the matching 4 tops.
TLA WS118X Shall be the Single 18" High Power Hanging Subwoofer consists of 1200WAES premium B&C loudspeaker unit. The unit matches TLA 21X and TLA21G.
TLA 21G Shall be the system Hanging and Floor Stacking system Grid, enabling the use of up to 12 units of TLA 21X.
TLA 21AP Presets –
FLAT POSITION:
Only basic Cross over in between low and high section with delay and level matching – those are "basic system presets".
This mode, enables free external processing for the user.
FR POSITION:
Basic + system processing for the use as Full Range speaker without Subwoofer in the case of lecture and similar use or with Sub via external C/O.
LC POSITION:
Basic + system + low cut at 90 Hz for the use as part of 3 Way Line Array including Subwoofer.
TLA-21X Specifications:
System Type: Line Array, Vented.
Configuration: Two Way, Bi Amp Passive with dedicated Amplifier in Subwoofer (TLA-21PA) or external amplification.
Power Capacity (Watts): 600 / 1200.
Internal Cross Over: Optional.
Nominal Impedance (Ohms): 8 Ohm.
Sensitivity (Low-Mid, dB @ 1Watt/1m): 99 / 105 max.
Full System (12 pcs.) SPL (dB), free field: 136/142 max.
Frequency Response (Hz +/- 3dB): 72Hz – 18kHz.
Crossover Frequency (Hz): 1250 Hz FIR or L-R 24db /Octave.
Driver Configuration: 10" 2-way.
HF Drivers: 2 x 1" Neodymium with 1.75" voice coil.
HF Power (Watts): 150W AES.
HF Impedance (Ohms): 8 Ohm.
HF Horn: 100° Horizontal 10° Vertical.
HF Protection: Solid State Compression.
LF Driver: One 10" Neodymium.
LF Power (Watts): 450W AES, 90Hz High Pass.
LF Impedance (Ohms): 8 Ohm.
Inputs: 2 NL4 , Paralleled.
Inputs Connection: NL4 Paralleled at pins 1+ and 1- 10" Low-Mid. 2+ and 2- Drivers.
Flying Hardware: Included with 1° increments from 0° to 10° splay on back. Front flight hinges.
Bar Handles: Two.
Enclosure Materials: 12 to 18mm Birch Plywood.
Grille: 16 Ga. Perforated Steel.
Finish / Covering: Polyurethane Durablast Coating.
Optional Finish / Covering: Black and other colors available OEM.
Dimensions (WDH, inches): 21.2 x 17.2 x 10.3 inches.
Dimensions (WDH, cm): 538.5 x 435.5 x 262 cm.
Weight (lbs/kg): 33.07 lbs / 15 kg.
System conection:
*עד גמר המלאי, לא תקף להזמנות עתידיות
*המבצעים באתר תקפים על מלאי זמין בלבד, ייתכנו סטיות בין המלאי באתר לבין המלאי הפיזי בחברה, המלאי הפיזי הינו הקובע.
*המבצע לא תקף עבור מוצרים שאינם במלאי או צפויים להגיע בעתיד.
